Unitron uStream - Mobile Phone Connectivity; Pairing Your Mobile Phone; Phone Call Preparation

1918
Pairing your mobile phone
. Enable Bluetooth on your phone settings
menu.
. Starting with the uStream in the o position,
press and hold the ( ) button and turn the
uStream on. The blue audio indicator will
flash.
. Enable Bluetooth paring mode on your
phone so that a new device can be added.
See manufacturer instructions for details. If
prompted, enter “” for pairing code.
. If prompted, accept request to grant
uStream access to your phone book. This is
used for voice calling and caller ID features.
. Aer successful pairing, the blue audio
indicator on the uStream will stop blinking.
Once pairing is done, your phone and uStream
should pair automatically.
Please contact your hearing healthcare
professional if you can not complete the pairing
procedure with the steps described.
To receive phone calls your phone must
support either the Bluetooth “Head Set” (HSP)
or “Hands Free” (HFP) prole. When pairing
to your phone, it may ask you which Bluetooth
service you want to enable. Select “Headset” or,
if available, “Stereo Headset.”
To access caller ID features, your phone must
support the Phone Book Access Prole (PBAP)
When pairing to a cellular phone, we recommend
disabling the phone key tones and SMS alerts.
To listen to stereo music from your phone, it
must support the A2DP/“Stereo Headset”
prole.
Preparing for phone calls
During phone calls with uStream, ensure your
phone is within - m (- ) to ensure a
reliable connection and ensure the uStream is
clipped securely to your clothing within  cm
of your hearing aids.