Unitron uStream - Advanced Phone Features; Call Management Options; Hold and Transfer Calls

2524
Advanced phone options
Your hearing healthcare professional may
congure the following additional features on
uStream. They will be assigned to a long press
(two seconds) of the access ( ):
Your phone must support these features. Please
consult the phone user manual for details.
Redial last number
A long press of the access ( ) button will redial
the last dialed number.
Voice dial
A long press of the access ( ) button will start
the voice dial which allows you to speak the
person’s name instead of typing the number.
When using two phones at the same time, only
the last paired phone can be used for voice dial.
Dial preferred number
A long press of the access ( ) button will dial a
pre-dened number.
Hold call
While in a phone conversation, a long press
of the access ( ) button will put the call on
hold. The caller stays on the line but there is no
audio transfer and the hearing aids switch to
the previous hearing program. Use this mode
to have a side conversation with a person next
to you without transmitting the conversation to
the person on the phone.
Transfer call
While in a phone conversation, a long press of
the access ( ) button will transfer the call to
the phone. This allows you to hand your phone
to another person. Your hearing aids will switch
back to the previous hearing program.
Aer holding or transferring a call, another long
press of the access ( ) button transfers the
call back to the uStream and the call is resumed
through your hearing aids.
As long as the call is on hold or transferred, you
may use the access ( ) button to change your
hearing aid programs again.