19
to move the telephone receiver slightly to find the best
reception. If the hearing instrument does not switch to
telephone program automatically when the telephone
receiver is placed in proximity, the magnet for easy-t
hearing instruments should be attached to the
telephone receiver. The magnet is designed to
strengthen the magnetic field at the ear piece of hearing
instrument compatible telephones.
To affix the easy-t magnet:
1. Clean the telephone receiver.
2. Hold the magnet near the “listening end” of your
telephone receiver and release it (Figure 1). The
magnet will flip to the appropriate side and seek the
optimal position on the telephone receiver.
3. Place the double-sided tape in this optimal position
on the telephone receiver (Figure 2) and attach the
magnet to the tape (Figure 3).
Warnings
Figure 1 Figure 2 Figure 3
To Next Page
Loading...
Need help?
General
