Need help?Do you have a question about the Univent PS-COS1479 and is the answer not in the manual?
Explains symbols related to the power cutter's safety features and operation.
Explains symbols used within the operator's manual for guidance.
Details essential personal protective gear for safe operation.
Describes the cutter's safety features and their maintenance.
Explains the anti-vibration system designed for user comfort.
Describes the function and operation of the stop switch.
Discusses the muffler's role in noise reduction and exhaust direction.
Explains the importance and function of the blade guard.
Covers checks and maintenance for the machine's safety components.
Provides general safety precautions for operating the power cutter.
Outlines fundamental safety rules for power cutter use.
Guidelines for safe transportation and storage of the power cutter.
Precautions for handling fuel, including mixing, storage, and refueling.
General safety precautions for working with the power cutter.
Safe techniques and precautions for using the cutting blade.
Information on health risks from vibration exposure and symptoms.
Step-by-step guide to proper cutting techniques for safe operation.
Details on using water cooling for cutting blades and its pros/cons.
Instructions on how to sharpen diamond blades for optimal performance.
Causes of blade vibration and how to address it.
Explanation of kickback and methods to avoid this dangerous phenomenon.
How to avoid blade pull-in and pinching during cutting.
Procedure for drying the blade after water cooling.
Instructions for checking the drive shaft speed with a tachometer.
General advice on servicing and storing the power cutter.
Specific instructions for caring for and storing cutting blades.
Overview of Univent's three standard blade designs: abrasive, carbide, diamond.
Information on blades designed for high-speed portable cutters.
Notes on special blades not suitable for portable power cutters.
Details on abrasive blade types, materials, and recommended uses.
Checks for the blade guard to ensure it is fitted correctly.
Information on diamond blades, their composition, and uses.
Details on diamond blade types, materials, and recommended uses.
Procedural steps for safely and effectively using diamond blades.
Information on diamond blades that do not require water cooling.
Identifies and labels the various parts of the power cutter.
Instructions for assembling the cutting head onto the power cutter.
Guide to properly fitting the cutting blade to the power cutter.
Information on the correct fitting and adjustment of the blade guard.
Procedure for checking the drive shaft and flanges for damage or wear.
Information on mixing gasoline and two-stroke oil for the power cutter.
Precautions and procedures for safely refuelling the power cutter.
Step-by-step guide to starting a cold engine.
Procedure for starting the engine when it is already warm.
Instructions on how to safely stop the engine.
How to adjust the tension of the drive belt for optimal performance.
Procedure for replacing the drive belt.
Notes on belt pulley and clutch maintenance.
Details on carburetor function, setting, and troubleshooting.
Information on the fixed high-speed jet in the carburetor.
Instructions for adjusting the low-speed needle (L-needle).
Information on the fuel filter's location, maintenance, and replacement.
Guide to cleaning, maintaining, and replacing the air filter system.
Instructions for replacing the starter cord or recoil spring.
Procedure for tensioning the recoil spring correctly.
Steps for replacing a broken recoil spring.
Guide to fitting the starter unit onto the power cutter.
Details on the muffler's function and maintenance.
Information on spark plug condition, cleaning, and replacement.
How to maintain the cooling system for optimal engine temperature.
Routine checks and cleaning tasks to perform daily.
Tasks to be performed weekly for proper upkeep.
Periodic maintenance checks to be done monthly.
Details on cylinder volume, bore, stroke, speed, and power.
Information on the ignition system manufacturer and spark plug.
Details on the fuel system manufacturer and carburetor type.
Specifications for the weight of the power cutter with and without accessories.
Data on cutting blades, gear ratio, and peripheral speed.
To Next Page
General