Max EQ and Sidechain Settings
With the UAFX Control mobile app, you can adjust low and high EQ settings
for each of the two UA 610 tube preamps to further tweak your tones. The FET
1176 effect also has a configurable compressor sidechain bass filter control.
Get UAFX Control
Low EQ
The low shelf EQ adjusts frequencies below 100 Hz. You can cut or boost the
lows by 6 dB. Set Low EQ to Off for flat bass response.
High EQ
The high shelf EQ adjusts frequencies above 10 kHz. You can cut the highs by
6 dB or boost the highs by 3 dB or 6 dB. Set High EQ to Off for flat treble
response.
Sidechain Bass Filter (FET 1176 only)
The sidechain bass filter removes low-frequency content from the
compressor’s control sidechain. This filter reduces FET 1176 compression and
“pumping” on bass-heavy audio signals, without reducing the bass content of
the audio signal itself.
To Next Page
Loading...
