Editing Rigs
OX Stomp includes a full editor for the cabinet, mics, and effects included in OX Stomp.
To open the OX Stomp editor, tap Edit at the bottom of the UAFX Control app after connecting
to your OX Stomp pedal. The currently selected Rig is loaded into the editor.
OX Stomp editor tips
Tap a selection triangle to expand or contract an editor section.
Double tap a slider to move the control to the center, or a volume control to the unity gain
level. On low and high shelf EQ sliders, double-tap to move the slider to the OFF position.
Tap and hold a slider for finer control as you adjust a setting.
Tap at either end of a slider to adjust the control up or down in 1% increments.
A note on OX Stomp EQ settings
OX Stomp EQ frequencies and Q (bandwidth) are often customized for different Rigs. Because
of the complexity of the EQ parameters, EQ frequency and Q settings are not displayed or
adjustable in the UAFX Control app.
The following settings are the EQ frequencies and Q factors for the Default Rig. For other Rigs,
the EQ settings may be different. If you want to know the exact EQ settings for a sound you are
building, start with the Default Rig. Otherwise, we encourage using your ears and
experimenting.
All HIGH CUT EQs
20 kHz, Slope 6
All LOW CUT EQs
20 Hz, Slope 6
To Next Page
Loading...
