OX Stomp Overview
Standing on the shoulders of our award-winning OX Amp Top Box, the UAFX OX Stomp
Dynamic Speaker Emulator pedal gives "amp-in-a-box" modelers a packed pro studio full of
authentic-sounding guitar cabinets, mics, room modeling, and studio-quality effects — right at
your feet. OX Stomp's sounds are meticulously modeled and deeply editable with the UAFX
Control mobile app.
OX Stomp Inputs
WARNING: OX Stomp is not a load box. Do not connect any powered amplifier or speaker
outputs to OX Stomp inputs.
You can use OX Stomp with any line-level (or lower) output source that requires cabinet
emulation, including:
UAFX amp emulator pedal
Other manufacturer's amp emulator
An amp load box's line output
Guitar amp's line (NOT speaker) output if a speaker load is connected
Any other line-level (or lower) output device that needs cabinet emulation
OX Stomp Outputs
You can connect OX Stomp to other line-level audio gear, including:
Full range flat response (FRFR) or other powered speakers
A computer's audio recording interface such as Apollo Twin X or Volt
Your PA system's mixer
Any other line-level (or lower) input device that captures your guitar sound
Important: Be sure to turn off the cabinet or speaker emulation on your amp emulator when
running into OX Stomp.
To Next Page
Loading...
