OX Rig
The Rig is a complete OX sound with speaker cabinet, two cabinet microphones, room sound,
and effects. Activate Rigs with the footswitches or the UAFX Control app.
Rig Preset
The Rig preset is a stored Rig. The Rig knob loads presets into the active Rig. Knobs and
switches may not reflect the sound of the loaded preset.
Edit & Save Rigs
Use the knobs and switches to adjust the active Rig sound. To save your adjustments, hold the
active Rig footswitch until the LED blinks or use the UAFX Control app. For details, go here.
Effects
OX Stomp includes four simultaneous studio-quality stereo effects — 4-band EQ plus low/high
cut, 1176 compression, stereo modulated delay, and stereo plate reverb. You can enable,
disable, and edit these effects with the UAFX Control app.
UAFX Control
UAFX Control is the companion mobile app for UAFX pedals. With OX Stomp and UAFX
Control, you can choose from over 100 curated factory Rigs, and customize them with 22
speaker cabinets, six cab mics, six room mics, and deep editing for each of the four effects.
Use UAFX Control to save and manage your customized Rig setups and assign them to each of
the six Rig knob positions. You can also configure OX Stomp's footswitches to recall different
rigs and toggle the delay/reverb effects.
To learn how to install and use UAFX Control, go here.
Get UAFX Control
To Next Page
Loading...
