OX Stomp Power
To learn how to power your UAFX pedals, go here.
OX Stomp Connections
WARNING: OX Stomp is not a load box. Do not connect any powered amplifier to inputs.
All UAFX audio jacks accept 1/4" (6.35 mm) unbalanced TS (Tip-Sleeve) instrument cables.
Although TRS (Tip-Ring-Sleeve) cables may be used, they offer no benefit over TS cables.
Stereo inputs are processed in true stereo.
UAFX pedals are designed with enough headroom to easily accommodate instrument levels
and amp effects loop levels, but they can also handle line-level gear such as synthesizers and
audio interfaces. The pedals are voiced for instrument levels, so you may need to reduce the
line out level of the gear you're connecting into the pedals to avoid overdriving the effects.
The USB-C port is for pedal registration and firmware updates only, within the UA Connect
desktop app for Mac and Windows computers. You can connect to any type of USB port on the
computer, but you may need an adapter.
The PAIR button and LED are for pairing a pedal with a mobile device for the UAFX Control app.
Connection Examples
These examples show a UAFX Amp Emulator pedal as the source emulator for OX Stomp;
however, you can use any amp emulator, line level direct output, fx loop output, or load box line
level output to the inputs of OX Stomp. Remember to turn off cab emulation on your amp
emulator.
To Next Page
Loading...
