Connect one output from your amp emulator to the OX Stomp 1/MONO input.
Connect the 1/MONO output from OX Stomp to your audio interface input.
Amp emulator and OX Stomp with a stereo audio
interface
You can use OX Stomp with an amp emulator and a stereo audio interface, for recording, or to
play through your computer and audio software.
Connect your instrument to your amp emulator input.
Turn off cab emulation on your amp emulator.
Connect one or more outputs from your amp emulator to the OX Stomp inputs.
Connect both outputs from OX Stomp to your audio interface inputs.
To Next Page
Loading...
