Safety 1-3
Safety Labels
CDRH and CE regulations require all laser manufacturers to affix warning labels in specific
locations throughout the equipment. The following warning labels are placed on the laser
system for your safety. DO NOT remove them for any reason. If the labels become damaged
or have been removed for any reason, DO NOT OPERATE the laser system and immediately
contact Universal Laser Systems Inc. for a free replacement.
A
B
Location of Safety Labels
Do not modify or disable any safety feature of this system. Do not
operate any system that has had its safety features modified,
disabled, or removed. Improper use of controls and adjustments, or
performance of procedures other than those specified in this manual, may
invalidate the safety of this system.
Do not stare into the beam or view directly with any optical
instrument. This laser system is equipped with a visible, red diode
pointing laser and is considered a Class 3A device by CDRH and CE.
To Next Page
