Universal Motors UMA1-2R2G-4

Need help?

Do you have a question about the Universal Motors UMA1-2R2G-4 and is the answer not in the manual?

Summary

Safety Precautions

Safety Definition

Defines terms like Danger, Warning, and Note for safety.

Warning Symbols

Safety Guidelines

Lists crucial safety rules for inverter operation and installation.

Quick Start-up

Installation Guidelines

Mechanical Installation

Guidance on physical mounting and environmental requirements.

Standard Wiring

Instructions for connecting power and control circuits.

Keypad Operation Procedure

Keypad Overview

Keypad Functionality

How to navigate menus, modify parameters, and view states.

Function Parameters

Basic Function Group (P00)

Start-up and Stop Control (P01)

Motor Control Settings (P03;P04)

Parameters for Vector and V/F control modes.

Input;Output Terminal Configuration (P05;P06)

PID Control Settings (P09)

Communication Protocol Settings (P14)

Parameters for Modbus serial communication setup.

Basic Operation Instruction

First Powering On

Step-by-step guide for initial inverter power-up.

Motor Parameter Setup

Procedures for setting motor parameters and autotuning.

Vector and Torque Control

PID Control Principles

Fault Tracking

Alarm and Fault Indications

How to interpret fault messages and LED indicators.

Fault Instruction and Solution

Table of fault codes, causes, and corrective actions.

Common Fault Analysis

Troubleshooting flowcharts for common inverter issues.

Communication Protocol

MODBUS Protocol Basics

Command Code Examples

Appendix C: Peripheral Options and Parts

Peripheral Wiring Diagram

Braking System Components

Information on selecting and using braking resistors and units.