1. Shredder may have reached the maxmium duty cycle. Check if the red
indicator light is illuminated.
2. Switch off the main power switch and unplug the shredder from the
power source.
3. Allow the motor to cool according to cycle time (60 minutes).
4. Plug the shredder into power source. Switch on the main power switch
in back of shredder and press the Stand-by button .
5. For further troubleshooting, please contact product support
1-866-756-4676.
A
B
A
D
Make sure shredder is plugged into power source and the main power
switch is switched on.
Make sure the waste bin is fully inserted into the shredder housing.
A
To Next Page
Loading...