50
TO START COOKING
Touch the ON/OFF control . After power on, the buzzer 1.
beeps once, all displays show 0, indicating that the induction
hob has entered the state of standby mode.
Place a suitable pan on the cooking zone that you wish to 2.
use. Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
Touching the heating zone selection control. 3.
Select a heat setting by touching the “ ” or “ ” control. 4.
• If you don’t choose a heat setting within 5 seconds, the
heating plate will automatically switch off and enter the state
of standby mode.
• You can modify the heat setting at any time during cooking.
• By holding down either of these buttons, the value will adjust
up or down.
To Next Page
Loading...
