66
CONNECTING THE HOB TO THE MAIN POWER SUPPLY
This hob must be connected to the mains power supply only
by a suitably qualified person.
Before connecting the hob to the mains power supply, check that:
The domestic wiring system is suitable for the power drawn 1.
by the hob.
The voltage corresponds to the value given in the rating plate 2.
The power supply cable sections can withstand the load 3.
specified on the rating plate.
To connect the hob to the mains power supply, do not use adapters,
reducers, or branching devices, as they can cause overheating and
fire.
The power supply cable must not touch any hot parts and must be
positioned so that its temperature will not exceed 75˚C at any point.
Check with an electrician whether the domestic wiring
system is suitable without alterations. Any alterations must
only be made by a qualified electrician.
To Next Page
Loading...
