Univex Duro 7512 Operator's Manual

10
TROUBLESHOOTING GUIDE
TROUBLE POSSIBLE CAUSE REMEDY
1. Slicer will
not operate.
1.1 Electrical service
down
1.2 Knife guard knob
not tight
1.3 Circuit breaker
tripped
1.4 Bad switch
1.5 Motor capacitor
defective.
1.6 Burned out motor
1.1 Check electrical service.
Replace fuse or reset
circuit breaker as
necessary
1.2 Tighten knob
1.3 Reset circuit breaker
1.4 Replace switch
1.5 Replace capacitor
1.6 Replace motor
2. Motor
running,
blade not
2.1 Broken belt 2.1 Replace belt
3. Excessive
noise.
3.1 Blade contacting
knife guard
3.2 Deflector
contacting blade
3.1 Check for loose knife
guard knob. Shim
tapered bushing.
3.2 Adjust deflector.
4. Not cutting
properly.
4.1 Dull blade or
improperly
sharpened blade.
4.2 Soft cheese.
4.3 Knife dirty with
hard, dried-on
product.
4.1 Sharpen blade
following outlined
procedures.
4.2 Chill for best slicing
results.
4.3 Clean knife thoroughly
10
04/09

Univex Duro 7512 Specifications

General

Brand	Univex
Model	Duro 7512
Category	Kitchen Appliances
Language	English