Do you have a question about the UNIVIEW NVR202-16E and is the answer not in the manual?
Model | NVR202-16E |
---|---|
Channel Input | 16 |
Max Resolution | 8MP |
USB Interface | 2 x USB 2.0 |
Power Supply | 12V DC |
Operating Humidity | 10% to 90% (non-condensing) |
Video Compression | H.265, H.264 |
HDD Bays | 2 |
Video Input | IP |
Video Output | HDMI, VGA |
Audio Input | 1 Channel |
Audio Output | 1 Channel |
Network Interface | 1 x RJ45 10/100/1000Mbps |
Power Consumption | ≤ 10 W (without HDD) |
Operating Temperature | -10°C to +55°C |
Procedure for logging into the NVR system for the first time.
Describes how to operate the NVR locally using a monitor and mouse.
Explains the functions of the NVR's physical front panel buttons.
Outlines the operation of the NVR using a remote control.
Step-by-step wizard to complete basic NVR configuration upon first use.
Explains icons indicating alarms, recording, and audio status in the preview.
Describes the function of buttons in the preview window toolbar.
Details options available via right-clicking in the preview window.
How to zoom into specific areas of the preview image for detail.
Adjusting image settings like brightness and contrast for optimal clarity.
Setting up video output, resolution, and camera-to-window linking.
Steps for adding and managing IP cameras connected to the NVR.
Steps to access the PTZ control and management windows.
How to save and recall specific PTZ camera positions.
Configuring and initiating automated PTZ camera movement sequences.
Recording and playing back custom PTZ camera movement paths.
Configuring video and audio stream parameters for recording.
Setting up parameters for taking snapshots from cameras.
Setting up a schedule for automatic recording and snapshot capture.
Configuring a schedule for automatic snapshot capture.
Configuring the NVR to record video upon detecting motion.
Configuring the NVR to take snapshots upon detecting motion.
Steps to log in to the NVR's web interface using a browser.