2
Before installing and operating this product, the owner
and/or installer must read, understand and follow these
instructions and keep them handy for future reference. If
these instructions are not followed, the warranty will be
considered null and void and the manufacturer deems
no further responsibility for this product. Moreover, the
following instructions must be adhered to in order to avoid
personal injuries or property damages, serious injuries and po
-
tentially fatal electric shocks. All electric connections must be made
by a qualied electrician, according to the electric and building codes effec
-
tive in your region. Do NOT connect this product to a supply source other than
120 VAC to 240 VAC, and do not exceed the load limits specied. Protect
the heating system with the appropriate circuit breaker or fuse. You must
regularly clean dirt accumulations on the thermostat. Do NOT use uid to
clean thermostat air vent. Do not install thermostat in a wet place. However,
installing it in isolated walls is allowed.
Note: When a part of the product specication must be changed to improve operability or
other functions, priority is given to the product specication itself. In such instances, the
instruction manual may not entirely match all the functions of the actual product. Therefore,
the actual product and packaging, as well as the name and illustration, may differ from the
manual. The screen/LCD display shown as an example in this manual may be different from
the actual screen/LCD display.
WARNING
To Next Page
Loading...