Unomedical comfort short

To Next Page

INS-833-1

Contents

[A] Needle guard

■

[B] Soft cannula

■

[C] Adhesive tape

■

[D] Introducer needle

■

[E] Cannula housing

■

[F] Tubing

■

[G] Connector needle

■

[H] Circular protective cap

[I] Disconnect cover

Infusion Set

Instructions for use

Unomedical a/s

Aaholmvej 1-3

Osted

4320 Lejre

Denmark

www.infusion-set.com

Consult pump manufacturer’s

instructions for use when connecting

infusion set to the insulin pump.

Fill the empty space in the cannula with the

following prime:

U-100 insulin:

0.7 u (0.007ml)

Click

Distributed by:

INS_833-1.indd 1 31-05-2011 11:36:00

Need help?

Do you have a question about the Unomedical comfort short and is the answer not in the manual?

Summary

COMFORT short Infusion Set Overview

Infusion Set Components

Lists essential components of the infusion set including needle guard, soft cannula, adhesive tape, and tubing.

Assembly and Priming Guide

Step-by-step visual instructions for assembling and priming the infusion set before application.

Indications, Contraindications, and Warnings

Indications for Use

Specifies the intended use for subcutaneous infusion of medication, including insulin, via external pump.

Contraindications

Highlights that the set is not intended for use with blood or blood products (I.V. infusion).

General Safety Precautions

Covers warnings on sterility, proper handling, insertion technique, and site care to prevent injury.

Insulin-Specific Usage Advice

Provides guidance for insulin therapy, including blood glucose monitoring and handling dislodgement.

Infusion Set Usage Procedures

Disconnecting the Infusion Set

Details the procedure for safely disconnecting the infusion set, including sealing the cannula housing.

Reconnecting the Infusion Set

Outlines the steps for securely reconnecting the infusion set after a temporary disconnection.