Upeasy Seat Assist User Manual

SAFETY PRECAUTIONS
The unique, patented design of the UPEASY Seat Assist
has safety at its core. While UPEASY is made to be as safe
as possible, there are some precautions you need to take:
Make sure you have something to hold on to when
getting up. UPEASY Seat Assist is designed for use
on chairs with arms that offer a suitably stable
seating surface. UPEASY is not r
ecommended for
use in wheelchairs, automobiles, reclining chairs or
office chairs with non-lockable wheels.
Always make sure that the chair your UPEASY
Seat Assist is used on will not slide along the floor.
When in doubt, place the chair with its back
against a wall or other fixed object.
When bending over to pick something up, do
not put any w
eight on your feet – otherwise the
UPEASY will start to lift you.
USER GUIDE
1
2
3
PLEASE NOTE: If, after setting your
UPEASY to the proper weight setting,
the cushion does not go down when you
sit on it, the lifting mechanism may be
stiff from prolonged inactivity. In this
case, simply set the weight setting at
the lowest level, and sit on the cushion
a few times until you feel it moving
freely again.Then reset for your weight.

Upeasy Seat Assist Specifications

General

Product Type	Seat Assist
Material	Polyurethane foam
Usage	Assisting individuals with sitting and standing
Product Name	Upeasy Seat Assist
Category	Personal Care Products
Power Source	Manual
Color	Blue

Summary

Safety Precautions

Ensure Support When Rising

Always have something to hold onto when getting up. Use with chairs offering a stable surface.

Prevent Chair Slippage

Ensure the chair will not slide. Place it against a wall if unsure.

Avoid Weight on Feet When Bending

Do not put weight on your feet when bending over, or the UPEASY will lift.

Cushion Not Lowering

If cushion doesn't lower, mechanism may be stiff. Reset weight to lowest, sit a few times, then reset.

Part Identification

Adjusting Weight Settings

Positioning the Seat Assist

Place the UPEASY on the floor with the end opposite the handle facing upwards.

Flexing the Cushion

Flex the cushion by pushing down on the upholstered part to allow the lifting mechanism to move freely.

Selecting the Correct Weight Setting

Choose a weight setting by centering the lifting mechanism pin between the appropriate grooves.

Closing for Transport

Lowering the Lifting Mechanism

Adjust the weight settings to allow the lifting mechanism to swing below the bottom setting.

Securing for Transport

Fold the cushion and secure it using the Velcro strip around the carrying handle for transport.

Placement in the Chair

Sitting Down with UPEASY

Getting Up with UPEASY

Caring for Your Seat Assist

Cover Care

The cover is removable and machine washable. Hang to dry.

Cushion Surface Cleaning

Sponge clean the surface with mild soap or detergent. Do not immerse in water.

Reattaching the Cover

Place the cover with the tag over the back/top of the cushion and pull down under the front edge.

Warranty Provisions

Warranty Service