3. Plug the power cord into an electrical socket.
4. Test your UPEASY Power Seat before using
it to ensure it is operating properly. There
are three operating positions: up, down and
stop. We recommend that you become
familiar with these before using your lifting
cushion.
Gently lift the lever up to raise the seat.
Select the middle setting to stop. Press down
to lower.
Note: Your UPEASY Power Seat will also
automatically stop when it is at its full height, and
when it is completely lowered, unless you move the
power lever to the “stop” position.
This section explains how to safely use your
UPEASY Power Seat.
Choosing Appropriate Chairs
The UPEASY Power Seat may be used on most
chairs, recliners and sofas – but always next to an
armrest. This is to ensure the utmost stability
when using the UPEASY Power Seat. We also
recommend that the chair or sofa you are using
it on have a suitably stable seating surface.
Setting Up For Use
When placing your UPEASY Power Seat on
your chair or sofa, the lever(s) should be to the
front and free from obstructions. Also, make
sure the cord is not under the base of the seat to
prevent it from damage or from becoming
unplugged. Finally, ensure that the cord is out
of the way so that no one can trip over it.
Using Your UPEASY Power Seat
Your UPEASY Power
Seat will add two inches
(2"/5cm) to the height
of your chair, recliner
or sofa when you are
seated. In order to use
your UPEASY Power
Seat safely, you will
need to keep both feet
on the floor at all times.
There are three ways to ensure you are able to
keep your feet on the floor at all times during
use:
(1) Use the “stop” position on the power
lever to control the height of the
UPEASY Power Seat. When rising,
simply stop the cushion at the point
where you are able to get out of the
chair comfortably with both feet on
the floor. When you go to sit again,
your UPEASY Power Seat will be
positioned at the perfect level for you
to sit comfortably.
(2) If the seat cushion of the chair/sofa
is removable, try using your UPEASY
Power Seat without the cushion, or
substitute a lower cushion.
(3) Reduce the height of the chair or sofa
by trimming the legs so that your feet
remain on the floor.
Obviously, method (1)
requires the least trouble
and effort, so try that
first. Now that you have
your UPEASY Power
Seat placed in your chair
or sofa, gently pull the
lever up and let it rise to
To Next Page
Loading...
Need help?
General