Rising from a Seated Position
• Place your hand(s) on the arm(s) of the
chair, or sofa and ensure both feet are on the
floor.
• Click one of the levers upwards – past the
“stop” position – and release.
• The motor will raise the lifting cushion and
automatically shut off when it is fully raised
– unless you choose to stop it first.
Using the “Stop” position
You can use the “stop” (center) position on the
power lever to stop your UPEASY Power Seat
at any time. You may want to use this:
• When rising – if you have reached the desired
height.
• Anytime you feel it is necessary to maintain
your stability.
a height that allows you to sit while keeping
both your feet on the floor. Stop it when it gets
to the appropriate height by gently pushing
down to the “stop” position on the power lever.
Now your UPEASY Power Seat is ready for use!
Note: If you have to hop up to get onto the UPEASY
Power Seat, then you have raised it too high. Simply
lower your lifting cushion so you can sit down with both
feet on the floor.
Operating Instructions
When operating your UPEASY Power Seat,
keep at least one hand on the arm of your chair
or sofa to ensure stability.
You only need to use one of the power levers to
raise and lower the seat.
Lowering into a Seated Position
Note: Your UPEASY Power Seat should be in the
raised position.
• Facing away from the seat, place your
hand(s) on the arm(s) of the chair, or sofa.
• Sit on the raised lifting cushion – keeping
both of your feet flat on the floor.
• Click one of the levers downward – past the
“stop” position – and release.
• The motor will lower the lifting cushion and
automatically shut off when it is fully
lowered – unless you choose to stop it first.
Note: Please remember that it is neither necessary, nor
advisable to keep pushing/pulling on the lever once the
motor has started.
www.upeasy.com
To Next Page
Loading...
Need help?
General