6
INSTALLATION
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE
CANADIAN ELECTRICAL CODE, AND IN QUEBEC, BY A QUALIFIED ELECTRICIAN.
The manufacturer assumes no responsibility for damages caused by improper wiring.
Improper installation automatically voids the warranty.
Before installation:
Verify that the heating appliance that is being connected is within the specified load range.
Ensure that the new thermostat is rated for 120 V / 240 V.
Ensure that the heating system is protected by appropriate circuit breakers or fuses.
Connect to COPPER conductors only.
TO AVOID FIRE, SHOCK, OR DEATH, SHUT OFF POWER SUPPLY
AT THE CIRCUIT BREAKER OR FUSE, AND TEST THAT THE POWER IS
OFF BEFORE WIRING.
*
To Next Page
Loading...
