STEP
7
14
STEP
4
After inserting the top rods through all the sleeves you need to connect all rods together, there is
several ways to connect it:
1. With T pole caps
as figure 1.
2. With nuts that connects
it together with Adjustable
Wrench as figure 2.
21
3. Connect each other by just
clicking them together.
b
a
STEP
5
To connect the ring, have another person
stand on the opposite side of you and push
the rods towards the center as shown in fig.
STEP
6
Insert the assembled rod circle into the
opening of the pole cap.
At last point add the connector to
complete the circle
STEP-
5
STEP-
4
STEP-
6
STEP-
7
See page 9 how to install the rope
2
1
To Next Page
Loading...