uPunch HN2000 - Page 16

QUESTIONS? Watch our helpful videos at upunch.com/resources
29
ER 93—Button Issue
ER 94—Internal memory issue
Resetting the HN Series Calculating Time Clock
To simply restart the time clock, press the Reset button.
To restore the default values, move the Set switch to the “0” position (to the right). Then
press the +, Clear, and Mode keys simultaneously until you hear three beeps. Finally, move
the Set switch back to the “–” position (to the left). Setting the clock to factory reset will
restore the default values, including: Date, Time, Time Signal, Print Color Options, and
Printing Position.
Examples of Time Calculations
IMPORTANT: Each time card has a unique number. You cannot use the same numbered
time card more than once in a pay period. The number appears in the lower-right corner of
the time card.
Example 1:
In Out In Out
8:02 12:04 12:34 17:04
Time clock settings:
• Punch Rounding: OFF
• Break/Lunch Deduction: ON, after 8:30 hours deduct 30 minutes
• Overtime = 8 hours
Total time before calculation: 8:32
Total time after calculation: 8 hours regular time,
32 minutes OT
The time card will look like this:
Example 2:
In Out In Out
8:02 12:04 12:34 17:04
END OF WEEKLY PAY PERIOD
END OF BIWEEKLY PAY PERIOD
IN
START
BREAK
END
BREAK
OUT
uPunch.com
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
V = Vacation S = Sick O = Other H = Holiday
REGULAR OVERTIME
92 3
4
5
6 7 81
Weekly OT/
Punch Pairs
Total Regular
Hours
Total Overtime
Hours
NOTES
NAME
PAY PERIOD
PAYROLL ID
DEPARTMENT
REG OT1 OT2 PAY RATE 1 PAY RATE 2 GROSS PAY
JOB
For more time tracking options, go to TrackMyPunch.com/SignUp. It's free!
08
:
02
MO
12
:
04
MO
12
:
34
MO
17
:
04
MO
08
:
00
B 00
:
32