uPunch HN2000 User Manual

16
The Back button allows you to reset an option that was
conrmed incorrectly.
IN OUT IN OUT IN OUT
NOTE: It is important that you match your uPunch
account settings with your uPunch time clock settings.
HN1—Basic Settings
HN1 is the rst menu in the time clock and allows you to
program the following features. Note that the year, month,
date, hour, and minute are preset to Pacic Time Zone.
Setting the Year (code 00)
Move the Set switch to the “0” position (to the right).
When the code “00” appears on the display, set the
last two digits of the current year using the + and –
buttons. Press Enter to conrm the setting.
Setting the Month and Date (code 01)
After conrming the year, the code “01” appears on
the display. Set the month and date using the + and –
buttons. Press Enter to conrm the setting.
Setting the Hour and Minute (code 02)
After conrming the month and date, the code “02”
appears. Set the hour (HH) and minute (MM) using
the + and – buttons. Press Enter to conrm the
setting.
Setting the Hour Format Display (code 03)
When the code “03” appears, set the hour display.
This allows the selection of 24-hour (Military) or
12-hour (Standard) time for display on the time

uPunch HN2000 Specifications

General

Brand	uPunch
Model	HN2000
Category	Clock
Language	English