18
to 2:00am. Use the + and – buttons to make your
selection, then press Enter to conrm the setting.
Setting the Month and Date of the end of Daylight
Savings Time (code 06)
When the code “06” appears, set the month and
date of the end of Daylight Savings Time (mm-dd).
Use the + and – buttons to make your selection, then
press Enter to conrm the setting. This may need to
be set each year, depending on your time zone.
Year Daylight Savings Time Ends
2014 November 2
2015 November 1
2016 November 6
2017 November 5
2018 November 4
Setting the Hour and Minute of the end of Daylight
Savings Time (code 07)
When the code “07” appears, set the hour and
minute of the end of Daylight Savings Time (hh:mm)
to 2:00am. Use the + and – buttons to make your
selection, then press Enter to conrm the setting.
HN2—Pay Period Settings
The HN2 menu allows you to program the following
features.
Setting the Day Change Time (code 00)
Under the HN2 menu, when the code “00” appears,
set the time at which the day changes (hour/minute).
Use the + and – buttons to make your selection, then
press Enter to conrm the setting.
Setting the Pay Period (code 01)
When the code “01” appears, set the pay period you
would like to use. The options are:
To Next Page
Loading...
Need help?
General
