uPunch HN2000 - Page 7

QUESTIONS? Watch our helpful videos at upunch.com/resources
11
Year Daylight Savings Time Starts
2018 March 11
2019 March 10
2020 March 8
2021 March 14
2022 March 13
Setting the Hour and Minute of the start of Daylight Savings Time (code 05)
When the code “05” appears, set the hour and minute of the start of Daylight Savings Time
(HH:MM) to 2:00am. Use the + and – buttons to make your selection, then press Enter to
conrm the setting.
Setting the Month and Date of the end of Daylight Savings Time (code 06)
When the code “06” appears, set the month and date of the end of Daylight Savings Time
(MM-DD). Use the + and – buttons to make your selection, then press Enter to conrm the
setting. This may need to be set each year, depending on your time zone.
Year Daylight Savings Time Ends
2018 November 4
2019 November 3
2020 November 1
2021 November 7
2022 November 6
Setting the Hour and Minute of the end of Daylight Savings Time (code 07)
When the code “07” appears, set the hour and minute of the end of Daylight Savings Time
(HH:MM) to 2:00am. Use the + and – buttons to make your selection, then press Enter to
conrm the setting.
HN2—PAY PERIOD SETTINGS
The HN2 menu allows you to program the following features.
Setting the Day Change Time (code 00)
Under the HN2 menu, when the code “00” appears, set the time at which the day changes
(hour/minute). Use the + and – buttons to make your selection, then press Enter to conrm
the setting.
Setting the Pay Period (code 01)
When the code “01” appears, set the pay period you would like to use. The options are:
1 Monthly—Select 01 for the Monthly option, then select the date on which the pay period
will start.
2 Weekly—Select 02 for the Weekly option, then select the day on which the pay period
will start. Enter 00 for Sunday, 01 for Monday, 02 for Tuesday, 03 for Wednesday, 04 for
Thursday, 05 for Friday, or 06 for Saturday.