Urban Key SMART CONTROL ONEPRO - Direct Copy - V2 | DITEC; Direct Copy - FAAC SLH

Press and keep pressing the
buon of the ONEPRO where
you wnat to insert the code
Press and keep pressing the
buon 1 of the remote, and
then press 3 mes the buon 2.
The LED will blink slowly, let go
the buons.
Press any other buon 3 mes,
the LED will blink twice and
turn o.
Place the original remote near
the ONEPRO and press the
buon on the original remote
you want to copy.
The LED will turn on.
Place the original remote and
the ONEPRO back to back and
press the buon of the original
remote you want to copy.
The LED will blink constantly,
indicang that the copy was
successful.
Simultaneously press the buon
P1 and P2 of the FAAC remote
and then press the buon you
want to copy again.
The LED of the ONEPRO will
blink fast.
Press the buon of the ONEPRO
you want to insert the code you
just copied. The LED will turn
o.
Copy was made successful.
Direct copy - V2 | DITEC
Direct copy - FAAC SLH
Brand table
APRIMATIC
DITEC
BFT
AVIDSEN / ASTRELL / EXTEL
DOORGATE
CARDIN - S449 QZ4
BENINCA - TO.GO
COMUNELLO VICTOR
AUTOMAT-EASY
DIMOEL - YKF06
CAME - TOPD4RBS
ALLMATIC
DOORHAN
CARDIN - S486 QZ4
BENINCA - TO.GO.VA
DEA
1 1 1 1
1 3 3 3
1 1 4 1
1 3 3 4
1 3 4 1
1 3 4 3
1 1 2 2
1 4 2 4
1 2 4 2
1 4 4 2
1 4 1 3
1 1 2 2
1 1 1 2
1 3 4 4
1 4 1 4
1 1 1 4
433 MHz
433 MHz
433 MHz
433 MHz
433 MHz
433 MHz
433 MHz
433 MHz
433 MHz
433 MHz
433 | 868 MHz
433 MHz
433 MHz
868 MHz
433 MHz
433 MHz
BRAND CODE (buons to press) FREQUENCE