EasyManua.ls Logo

Urbana U50 User Manual

Default Icon
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
WARNING: If the information in this manual is not followed exactly, a re or explosion
C#4001609
CERTIFIED TO: ANSI Z21.88 / CSA 2.33 VENTED GAS FIREPLACE HEATERS
CSA 2.17 GAS FIRED APPLIANCES FOR HIGH ALTITUDES
WARNING: If the information in this manual is not followed exactly, a re or explosion
may result causing property damage, personal injury or loss of life. Installation and
service must be performed by a qualied installer, service agency or the gas supplier.
C#4001609
U50 / U70
U50T / U70T
INSTALLATION MANUAL
C-16102
Question and Answer IconNeed help?

Do you have a question about the Urbana U50 and is the answer not in the manual?

Urbana U50 Specifications

General IconGeneral
BrandUrbana
ModelU50
CategoryIndoor Fireplace
LanguageEnglish

Summary

Installation Manual and Safety Overview

Critical Safety Warnings

Essential safety warnings regarding fire, explosion, and gas leaks.

General Safety Precautions

Important safety guidelines for operating and maintaining the fireplace.

Product Information and Operation

Unit Specifications and Testing

Details on direct vent, testing, and certifications.

Unit Dimensions and Rating Label

Physical dimensions and location of the product's rating label.

Lighting and Operating Instructions

Step-by-step instructions for lighting, operating, and shutting down the unit.

Unpacking and Initial Setup

Crate Unpacking and Component Identification

Procedures for unpacking and identifying all included parts.

Installation Procedures

Step-by-step guide for installing components and making necessary connections.

Maintenance and Service

Inspection and Cleaning Guidelines

Recommended procedures for routine inspection and cleaning.

Component Maintenance and Replacement

Detailed steps for servicing and replacing internal components.

Safety Circuit System Overview

Explanation of the safety system and its critical components.

Framing and Installation

Chase Framing and Airflow Requirements

Guidelines for building the chase and maintaining airflow for cooling.

Framing Clearances and Dimensions

Critical clearance dimensions and framing options for safe installation.

Venting System Installation

Venting Introduction and Considerations

Overview of venting options and important installation considerations.

Vent Termination and Clearances

Regulations and required clearances for vent pipe termination.

Vent Configurations and Settings

Approved vent configurations and exhaust restrictor settings for optimal performance.

Parts, Troubleshooting, and Wiring

Component Parts Identification

Visual guide to identify all available replacement parts.

Troubleshooting Common Issues

Solutions for common problems encountered during operation or installation.

Wiring Diagram

Electrical schematic illustrating component connections and wiring.

Warranty Information

Warranty Terms and Coverage

Details on product warranty, terms, conditions, and coverage periods.

Related product manuals