URBANGLIDE MANUEL D'UTILISATION ECROSS PRO BOOST - Drive Wheels and Modes

27
First, turn on your product by pressing the "Power" button on the handlebar. Check that your battery is
charged.
Drive wheels
You can switch from 1 to 2 wheel drive. To do
this, simply press the number 4 button on
your handlebars. When you switch to two-
wheel drive, your scooter accelerates faster
and uses more energy. To maximize your
range, use two-wheel drive for uphill or
difficult land.
Place your foot on the deck of your scooter
and use your other foot to push forward.
Gently squeeze the throttle trigger to begin
picking up speed.
To brake, gently squeeze the brake levers
on your handlebars.
When you need to turn, slow down to make
your turn safely.