URBANGLIDE RIDE 100 MAX User Manual

9
Unfolding steps
1. To unfold the scooter, first put the scooter on straight and
then press the mudguard to release the hook, hold the chainring,
lift the handlebars to the stem position and close the
folding/unfolding latch.
Using the screen
1
Displays the speed at which you are travelling
2
Switching on the front light: To do this, press the button briefly once. To turn off, repeat the same operation.
3
Speed level: There are 3 speed modes (ECO/D/S), press the button twice to switch from one speed mode to another.
4
Error message
5
Battery level
6
Button On/Off
Use of the button On/Off :
1. The battery indicator shows the remaining battery level in real
time.
2. To turn the scooter on, press and hold the On/Off button for 1 to 2
seconds. The same applies to turning off the scooter.
3. Once the scooter is on, press the On/Off button once to turn on
the front light. Press once more to turn it off.
4. To change the speed modes "1, 2 and 3" press the On/Off button
twice.
- Speed 1: maximum speed of 6km/h
- Speed 2: maximum speed of 15km/h
- Speed 3: maximum speed of 25km/h
- Walk mode: Walking speed 3km/h
5. Cruise control: Press the On/Off button 5 times to activate this
mode.
6. To change between zero start and kickstart, press the On/Off
button 6 times.

URBANGLIDE RIDE 100 MAX Specifications

General

Brand	URBANGLIDE
Model	RIDE 100 MAX
Category	Scooter
Language	English