choosing unapproved components or installing components in wrong way
will damage electric scooter and even cause personal injury, in order to
ensure the quality and safety, All components needs to be approved by our
company and make sure they are installed in correct way. Please do not try to
ride an electric scooter which is not installed in proper way. Do not remove
and refit the electric scooter without the permission, otherwise it may cause
the electric scooter to be unrecoverable.
2.5 Assembly
Disassemble and take out the quick release from the front wheel
Then connect the quick release with the front fork part
Last assemble the quick release tightly
2.6 Folding
Fold and unfold by release and fasten the buckle( As show on picture)
To Next Page