What to do if a Test Sensor Error occurs on URIT Medical Electronic UC-32A?
If you encounter a Test Sensor Error on your URIT Medical Electronic Measuring Instruments, first ensure the strip tray is properly attached. Try restarting the instrument. If the issue persists, contact the after-sales service unit for assistance.
Why am I getting a Strip Type Error on my URIT Medical Electronic UC-32A?
If you are getting a Strip Type Error with your URIT Medical Electronic Measuring Instruments, make sure you are using the URIT brand HC series urine reagent strip.
How to fix Strip Motor Error on URIT Medical Electronic UC-32A?
If you are facing a Strip Motor Error with your URIT Medical Electronic Measuring Instruments, check that the strip tray is correctly installed.
What to do if URIT Medical Electronic UC-32A Measuring Instruments says 'No strip'?
If your URIT Medical Electronic Measuring Instruments indicates 'No strip', place a reagent strip on the strip tray.
General| Display | LCD touch screen |
|---|---|
| Interface | USB |
| Power Supply | AC 100-240V, 50/60Hz |
| Accuracy | Depends on test item |
| Measurement Time | < 60 seconds |
Key features of the UC-32A urine analyzer, including portability and display.
Specifies the purpose and applications of the urine analyzer for clinical diagnosis.
Lists conditions where the instrument should not be used.
Technical details and performance parameters of the instrument and printer.
Explains the internal design, components, and working mechanism of the analyzer.
Details the external look and parts of the instrument and printer with diagrams.
Steps to take after receiving the instrument and checking for damage.
Guidelines for proper operation, EMC, and regulatory compliance.
Procedure for battery installation, handling, and replacement.
Instructions for connecting the external printer via USB or Bluetooth.
Guide on how to load paper into the printer correctly.
Guidelines for handling and preparing urine samples for accurate testing.
Instructions for using reagent strips correctly, including storage and handling.
Safety and operational guidelines for the instrument's environment and usage.
Steps for turning the instrument on and off, including icon meanings.
Detailed steps for performing routine measurements, including sample prep and strip handling.
Procedure for checking instrument performance using check strips and quality control.
Step-by-step guide for performing the instrument checkup procedure.
Details on the printer's connectivity via Bluetooth and operational status.
Explanation of how to select test parameters and initiate automatic measurement.
How test results are displayed, interpreted (symbols), and output.
Steps to access and review stored test results using the interface buttons.
Configuration options for units, ratios, time, Bluetooth, language, and firmware updates.
Instructions for connecting the instrument to a mobile phone via Bluetooth.
Overview of the mobile app's modules: Device Management, Health Assessment, Data Center.
Safety precautions regarding biological risks during instrument maintenance.
Guidelines for cleaning the instrument's exterior surface.
Daily cleaning procedure for the strip tray to prevent contamination.
Guidelines for transporting and handling the precise instrument to avoid damage.
Recommended conditions for storing the instrument to maintain its integrity.
To Next Page
