urmet domus FDI Transit GB-100-021 User Manual

INSTALLATION GUIDE
CONTENT
INTRODUCTION:
CERTIFICATION AND WARRANTY.....................................................................................
SYSTEM OVERVIEW..........................................................................................................
TECHNICAL FEATURES.......................................................................................................
OPERATING PRINCIPLES....................................................................................................
IN WHICH CONFIGURATION DO YOU USE TRANSIT ?............................................................
CONFIGURATION N°1.......................................................................................................
CONFIGURATION N°2.......................................................................................................
CONFIGURATION N°3.......................................................................................................
CONFIGURATION N°4.......................................................................................................
CONTROLLER PARAMETERS PROGRAMMATION...............................................................
WIRING FOR DOOR CONTROL............................................................................................
2
3
4
6
7
8
10
12
14
16
18
1
50-000-611 DOC TRANSIT GB FDI C

urmet domus FDI Transit GB-100-021 Specifications

General

Category	Security Sensors
Operating Voltage	12 VDC
Weight	150 g
Protection Rating	IP54
Material	ABS Plastic
Power Consumption	1.5 W
Humidity	95% RH, non-condensing
Output	Relay NO/NC

Summary

DECLARATION OF CONFORMITY

SYSTEM OVERVIEW

TECHNICAL FEATURES

OPERATING PRINCIPLES

TRANSIT CONFIGURATION OPTIONS

Configuration 1: Dual Channel Operation

Door 1 and Door 2 controlled independently by separate channels.

Configuration 2: Channel & Proximity Control

Door 1 controlled by channel, Door 2 by proximity key or remote.

Configuration 3: Proximity & Channel Control

Door 1 controlled by proximity key or remote, Door 2 by channel.

Configuration 4: Dual Proximity Control

Both Door 1 and Door 2 controlled by proximity keys or remote.

CONTROLLER PROGRAMMING FUNCTIONS

Function F1: Password Management

Secure the unit by setting, changing, or deleting passwords.

Function F2: Pushbutton Configuration

Define pushbutton behavior as Normally Open (NO) or Normally Closed (NC).

Function F3: Relay Timeout Settings

Configure the duration for door lock release times for both doors.

Function F4: Backup Memory Operations

Copy and restore unit settings to and from backup memory.

Function F5: RF Interference Analysis

Test and evaluate radio frequency signal quality and saturation levels.

DOOR CONTROL WIRING DIAGRAMS

Gate Automation Wiring (NO/NC)

Wiring schematics for gate automation using NO or NC contacts.

Fail-Secure Lock Wiring

Instructions for wiring fail-secure locks, requiring constant power.

Magnetic Fail-Safe Lock Wiring

Wiring guide for magnetic fail-safe locks, maintaining lock status.

Fail-Safe Lock Wiring Diagram

Diagrams for fail-safe locks, ensuring door remains locked on power loss.