To Next PageTo Next Page
Need help?Do you have a question about the urmet domus IPerHome MODO 1717 and is the answer not in the manual?
General| Category | Home Automation |
|---|---|
| Manufacturer | Urmet |
| Brand | Urmet Domus |
| Model | IPerHome MODO 1717 |
| Connectivity | Ethernet |
| Power Supply | PoE (Power over Ethernet) |
| Operating Temperature | 0°C to 40°C |
| Display | 7 inch TFT LCD |
Configure MODO to use the IPerBus home automation bus for control and data display.
Customize scenario names for easier identification and activation within the MODO system.
Configure MODO to forward detected IPerBus alarms to the concierge switchboard.
Configure pulse meters for monitoring energy consumption via IPerBus or local connection.
Set the internal clock for accurate time references, essential for IPerBus and pulse meter functions.
Reset MODO parameters to default values, clearing logs and configurations.
Activate pre-configured scenarios via the MODO interface for home automation control.
Monitor and manage alarms detected on the IPerBus system via the MODO display.
Understand how IPerBus alarms affect or interact with door phone conversations.
View stored alarms based on their priority level when multiple events occur.
View energy consumption data from pulse meters connected to the IPerBus system.
View energy consumption data from a pulse meter connected directly to the MODO monitor.
Receive warnings for exceeding instantaneous power limits on connected pulse meters.
Understand how energy limit alarms interact with door phone functions during calls.
Receive warnings for exceeding monthly energy consumption limits for local pulse meters.
Detailed wiring diagram for connecting the MODO monitor to the IPerBus system.
Detailed wiring diagram for connecting the MODO monitor to a pulse energy meter.
