urmet domus mikra 1122/31

To Next Page

DS 1122-003C

LBT 8568

Area tecnica

servizio clienti +39 011.23.39.810

http://www.urmet.com

e-mail: info@urmet.com

Fabbricato da Urmet Electronics Limited

(azienda del gruppo Urmet) - MADE IN CHINA

Manufactured by Urmet Electronics Limited

(an Urmet group company) - MADE IN CHINA

URMET S.p.A.

10154 TORINO (ITALY)

VIA BOLOGNA 188/C

Telef. +39 011.24.00.000 (RIC. AUT.)

Fax +39 011.24.00.300 - 323

DS 1122-003C LBT 8568

Mod.

1122

KIT AUDIO 2 FILI MONOFAMILIARE

2-WIRE ONE FAMILY AUDIO KIT

KIT AUDIO 2 FILS À 1 FAMILLE

KIT AUDIO 2 HILOS UNIFAMILIAR

AUDIO-KIT 2 DRAHTE FÜR EINFAMILIENHAUS

Sch./Ref. 1122/31 -/39

PRI

SCHEMA DI COLLEGAMENTO BASE / BASIC WIRING DIAGRAM /

SCHEMA DE CONNEXION DE BASE / ESQUEMA DE CONEXIÓN BASE /

BASIS-ANSCHLUSSPLAN

Il prodotto è predisposto per il montaggio dei seguenti accessori:

Sch. 1134/55: Tasti addizionali;

Sch. 9854/43 Suoneria universale;

Sch. 1129/52 Citofono supplementare (6 ﬁ li).

The product is set up for ﬁ tting the following accessories:

Ref. 1134/55: Additional buttons

Ref. 9854/43: Universal ringer

Ref. 1129/52: Additional door phones

Le produit est prévu pour le montage des accessoires suivants :

Réf. 1134/55: Touches supplémentaires

Réf. 9854/43: Sonnerie universelle

Réf. 1129/52: Poste d’appartement supplémentaires

El producto está predispuesto para montarle los siguientes accesorios:

Ref. 1134/55: Teclas adicionales

Ref. 9854/43: Soneria universal

Ref. 1129/52: Teléfono suplementario

Das Produkt ist für die Installation der folgenden Zubehörteile ausgelegt:

BN 1134/55: Zusatztasten

BN 9854/43: Universal-ring

BN 1129/52: Zusätzlicher Hausstation

Non utilizzare doppino telefonico.

Don’t use a telephone wire.

Ne pas utiliser le câble de

ligne telephonique.

Non utilizar un par trenzado

telefónico.

Telefonkabel nicht zu verwenden.

DIAMETRI E SEZIONI MINIME DEI CONDUTTORI

WIRES MINIMUM DIAMETERS AND SECTIONS

DIAMETRES ET SECTIONS MINIMUM DES CONDUCTEURS

DIAMETROS Y SECCIONES MINIMOS DE LOS HILOS

DRAHTS-DURCHMESSER UND MINDESTSCHNITTE

Nota di chiamata:

1= Melodia 1

2= Melodia 2

Calling tone:

1= Tone 1

2= Tone 2

Tonalités d'appel:

1= Sonnerie 1

2= Sonnerie 2

Nota de llamada:

1= Melodía 1

2= Melodía 2

Rufnote:

1= Melodie 1

2= Melodie 2

1 (default) 2

11 12

Trasformatore

Transformer

Transformateur

Transformador

Transformator

Contatto apricancello

Gate opening contact

Contact pour ouverture de grille

Contacto para dispositivo

de apertura del portón

Kontakt für Gittertüröffner

(MAX 1A 120Vac)

Rete~

Mains~

Réseau~

Red~

Netz~

Citofono

Door phone

Poste

d'appartement

Teléfono

Hausstation

Serratura elettrica

Electric lock

Serrure électrique

Cerradura eléctrica

Elektrisches Schloß

Suoneria universale

Universal ringer

Sonnerie universelle

Soneria universal

Universal-ring

Sch./Ref.9854/43

K Z

S- S+

~12

SE1

SE2

AP1

AP2

AP1

SCHEMA DI COLLEGAMENTO CON APERTURA ELETTROSERRATURA DA

PULSANTE ANDRONE / LOCK RELEASE FROM HALL BUTTON CONNECTION

DIAGRAM / SCHEMA DE CONNEXION AVEC OUVERTURE SERRURE

ELECTRIQUE PAR BOUTON HALL / ESQUEMA DE CONEXIÓN CON APERTURA

DE LA CERRADURA ELÉCTRICA MEDIANTE PULSADOR DEL VESTÍBULO /

ANSCHLUSSPLAN MIT ÖFFNUNG DER ELEKTROVERRIEGELUNG ÜBER

TASTE IN DER VORHALLE

Trasformatore

Transformer

Transformateur

Transformador

Transformator

Rete~

Mains~

Réseau~

Red~

Netz~

Serratura elettrica

Electric lock

Serrure électrique

Cerradura eléctrica

Elektrisches Schloß

Pulsante androne

Door release button

Poussoir ouvre-porte

Pulsador abrepuerta

Türöffnertaste

S- S+

~12

SE1

SE2

AP1

SC101-1427E

Distanza massima da trasformatore a pulsantiera

Maximum distance between transformer and push-

button panel

Distance maximale entre transformateur et plaque

de rue

Distanzia maximá de transformador a placa

pulsadora

Abstand maximale vom Transformator zur Türstation

60 m

90 m

110 m

~12, ~0, 1, 2

0,5 mm

0,75 mm

1 mm

MAX

MIN

Volume di chiamata minimo

Minimum calling volume

Volume d'appel minimum

Volumen minimo de llamada

Min. Ruflautstärke

Rosso

Red

Rouge

Rojo

Rot

MUTE

Chiamata esclusa

No calling tone

Appel exclu

Llamada excluida

Ruf ausgeschlossen

Volume di chiamata massimo

Maximum calling volume

Volume d'appel maximum

Volumen maximo de llamada

Max. Ruflautstärke

Need help?

Do you have a question about the urmet domus mikra 1122/31 and is the answer not in the manual?

This document describes a two-wire audio kit designed for single-family homes, identified as Model 1122 and LBT 8568. The kit includes an outdoor push-button panel and an indoor door phone, offering essential communication and access control functionalities.

Function Description:

The primary function of this audio kit is to facilitate two-way audio communication between a visitor at the outdoor push-button panel and an occupant inside the home via the door phone. It also integrates access control, allowing the occupant to remotely open an electric lock (e.g., a gate or door) connected to the system.

The outdoor push-button panel, available in both surface-mounted and recessed installation options, features a call button that, when pressed, activates a selectable calling tone on the indoor door phone. The door phone provides controls for adjusting the calling volume, muting the call tone, and activating the electric lock.

The system supports the integration of additional accessories to enhance its capabilities. These include:

Additional buttons (Ref. 1134/55): For expanding control options.
Universal ringer (Ref. 9854/43): To provide an alternative or supplementary call signal.
Additional door phones (Ref. 1129/52): To allow multiple indoor units for larger homes or multiple points of access within the same residence.

Important Technical Specifications:

Wiring: The system operates on a two-wire connection, simplifying installation.
Wire Diameters and Sections:
- For distances up to 60m from the transformer to the push-button panel, a minimum wire section of 0.5 mm² is required.
- For distances up to 90m, a minimum wire section of 0.75 mm² is required.
- For distances up to 110m, a minimum wire section of 1 mm² is required.
- The use of telephone twisted pair wiring is explicitly not recommended.
Transformer Connection: The system requires a transformer (e.g., 12V AC) for power, with connections typically labeled ~12, ~0, 1, 2.
Electric Lock Output: The system provides an output for an electric lock (SE1, SE2).
Gate Opening Contact: An auxiliary contact (AP1, AP2) is available for gate opening, rated for a maximum of 1A at 120Vac.
Calling Tones: The door phone offers two selectable calling tones (Melody 1 and Melody 2).
Volume Control: The door phone includes controls for maximum and minimum calling volume, as well as a mute function.
Recessed Installation Box: For recessed installation of the push-button panel, a specific embedding box (Ref. 1122/60) must be purchased separately.

Usage Features:

Call Initiation: Visitors press the call button on the outdoor panel to initiate a call.
Call Reception: The indoor door phone rings with a selectable melody.
Volume Adjustment: Users can adjust the calling volume on the door phone from maximum to minimum, or mute it entirely. A red indicator light signifies when the call tone is muted.
Door/Gate Release: A dedicated button on the door phone allows remote activation of the electric lock, granting access to visitors.
Auxiliary Gate Opening: The system can be wired to open a gate via a separate contact, providing flexibility for different access points.
Multiple Door Phones: The ability to connect additional door phones (Ref. 1129/52) allows for multiple points of communication within the home.
Additional Control Buttons: The system supports additional buttons (Ref. 1134/55) for expanded control functionalities, though specific applications are not detailed.

Maintenance Features:

Wiring Diagrams: The manual provides clear basic wiring diagrams (SC101-1427E) for standard installation and for connecting an electric lock via a hall button. These diagrams are crucial for troubleshooting and maintenance.
Component Identification: The exploded views and component lists (e.g., screws, mounting plates) facilitate easy identification and replacement of parts if needed.
WEEE Compliance: The product is compliant with Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). This means the device should not be disposed of with general household waste but should be taken to designated collection points for recycling. This ensures environmentally responsible disposal and promotes the recovery of materials. The symbol of the crossed-out wheeled bin on the product or packaging indicates this requirement. Users are advised to contact local authorities or retailers for information on proper disposal.