UROVO RFDT50 Quick Start Guide

2 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

RFDT50 Handheld Data Terminal

FCC ID:SWSRFDT50

Quick Start Guide

How to Use

Push forward the switch locks on both sides of

handle to the head to open the handle.

Step1

UnLock Postion

Lock Postion

Release button Up

Push backward the switch lock to release the device

from handle.

Step2

Push forward the switch lock buttions on handle to

ﬁxed device.

Step3

Other manuals for UROVO RFDT50

User Guide31 pages

Questions and Answers:

S
Stephen OconnellAug 7, 2025
Why does my UROVO Barcode Reader show RFID module not connected?
- J
  Janet MillerAug 7, 2025
  If the host device indicates that the RFID module of your UROVO Barcode Reader isn't connected, it could be due to several reasons. First, the RFDT50 may have automatically powered off the RFID module after a period of inactivity; press the power button again to reactivate it. Second, the battery might be dead, so try charging it. Finally, there may be a module exception, in which case you should contact the manufacturer for technical support.
M
Monica BrownAug 16, 2025
What to do if UROVO RFDT50 Barcode Reader status light does not turn on?
- J
  jonathan17Aug 16, 2025
  If the status light on your UROVO Barcode Reader (RFDT50) doesn't turn on after pressing the power button, the battery is likely not charged. Charge the battery to resolve this issue.

UROVO RFDT50 Specifications

General

Model	RFDT50
Device Type	Barcode Reader
Operating System	Android
Touch Panel	Capacitive
Barcode Scanner	Yes
Scanning Capability	1D/2D Barcodes
NFC	Yes
Wi-Fi	802.11 a/b/g/n/ac
Battery Capacity	4000 mAh
Battery Type	Li-ion
Operating Temperature	-20°C to 50°C
Storage Temperature	-40°C to 70°C
Sealing	IP65
Memory (RAM)	4 GB
Memory (ROM)	64 GB
Display Size	5.5 inch
Resolution	1280 x 720
Rear Camera	13 MP
Scan Engine	Honeywell N6603
Durability	1.5m drop resistance
Dimensions	15mm