Need help?Do you have a question about the Ursalink UC1152 and is the answer not in the manual?
Lists key features of the UC1152, including I/O, serial interfaces, cloud integration, and LoRaWAN.
Details technical parameters like antenna, frequency band, sensitivity, power, RS485, RS232, digital input, output, and dimensions.
Explains the meaning of the System and ACT LED indicators for operational status and network connectivity.
Advises on installation location, avoiding electrical noise and metal enclosures without external antennas.
Details power supply requirements (12V, 0.5A) and general installation considerations, including lightning protection.
Describes the micro USB port for connecting to a PC for configuration.
Details the terminal descriptions for DC power, RS232, RS485, Digital Input, and Digital Output.
Explains the behavior of the digital input terminal and its trigger conditions.
Describes the relay output functionality, including its specifications and terminal connections (NC, COM, NO).
Outlines steps to connect the UC1152 to a PC and use the Ursalink ToolBox for configuration.
Details serial port parameter configuration like COM port, baud rate, data bits, parity, and stop bits in the ToolBox.
Explains how to view the device's basic status information, including network join status, RSSI/SNR, and I/O status.
Configure general device settings and parameters.
Basic general settings including reporting interval, data polling interval, and password change.
Configure RS485 communication parameters such as enable, baud rate, data bits, stop bits, and Modbus RS485 bridge.
Configure RS232 communication parameters including baud rate, data bits, stop bits, and packet length.
Configure LoRaWAN network parameters and settings.
Basic LoRaWAN settings including Device EUI, App EUI, Application Port, Join Type (OTAA/ABP), and Datarate.
Allows viewing and setting up LoRa frequencies and channel configurations for data transmission.
Configures advanced LoRaWAN settings like Confirm Mode, ADR Mode, TX Power, and duty cycle.
Enables adding channels to poll remote Modbus slaves, setting execution interval and response time.
Manage device commands including reading from the device, opening/saving command files.
Read commands from the device. Also covers opening/saving command files and saving commands to device/file.
Describes the process of importing an existing command file from a PC.
Details how to save configured commands directly to the Ursalink UC1152 device.
Explains how to save configured commands as a file on the computer.
Configure IF-THEN behaviour commands for conditional actions.
Details supported IF conditions: Time, Received Message, Digital Input, Channel Input, Device Restarts.
Triggers commands based on specific times of day or selected days of the week.
Allows triggering commands based on receiving a specific message content.
Triggers commands when the digital input state changes, with options for edge-triggering or level-triggering.
Triggers commands based on channel input values meeting specified thresholds (above, below, within).
Triggers commands when the UC1152 device has finished restarting.
Details supported THEN actions: Change Output, Send Custom Message, Restart Device.
Defines actions to change the state of an output (activate, deactivate, change state) based on conditions.
Sends a custom text message via LoRaWAN when a condition is met.
Restarts the Ursalink UC1152 device when a specific condition is met.
Process for upgrading device firmware using the Ursalink ToolBox.
Example configuration for setting up a periodic status report using behavior statements.
Examples for controlling appliances, including sending alerts on threshold breaches.
Configure an alert for when a channel value exceeds a specified threshold.
Lists key features of the UC1152, including I/O, serial interfaces, cloud integration, and LoRaWAN.
Details technical parameters like antenna, frequency band, sensitivity, power, RS485, RS232, digital input, output, and dimensions.
Explains the meaning of the System and ACT LED indicators for operational status and network connectivity.
Advises on installation location, avoiding electrical noise and metal enclosures without external antennas.
Details power supply requirements (12V, 0.5A) and general installation considerations, including lightning protection.
Describes the micro USB port for connecting to a PC for configuration.
Details the terminal descriptions for DC power, RS232, RS485, Digital Input, and Digital Output.
Explains the behavior of the digital input terminal and its trigger conditions.
Describes the relay output functionality, including its specifications and terminal connections (NC, COM, NO).
Outlines steps to connect the UC1152 to a PC and use the Ursalink ToolBox for configuration.
Details serial port parameter configuration like COM port, baud rate, data bits, parity, and stop bits in the ToolBox.
Explains how to view the device's basic status information, including network join status, RSSI/SNR, and I/O status.
Configure general device settings and parameters.
Basic general settings including reporting interval, data polling interval, and password change.
Configure RS485 communication parameters such as enable, baud rate, data bits, stop bits, and Modbus RS485 bridge.
Configure RS232 communication parameters including baud rate, data bits, stop bits, and packet length.
Configure LoRaWAN network parameters and settings.
Basic LoRaWAN settings including Device EUI, App EUI, Application Port, Join Type (OTAA/ABP), and Datarate.
Allows viewing and setting up LoRa frequencies and channel configurations for data transmission.
Configures advanced LoRaWAN settings like Confirm Mode, ADR Mode, TX Power, and duty cycle.
Enables adding channels to poll remote Modbus slaves, setting execution interval and response time.
Manage device commands including reading from the device, opening/saving command files.
Read commands from the device. Also covers opening/saving command files and saving commands to device/file.
Describes the process of importing an existing command file from a PC.
Details how to save configured commands directly to the Ursalink UC1152 device.
Explains how to save configured commands as a file on the computer.
Configure IF-THEN behaviour commands for conditional actions.
Details supported IF conditions: Time, Received Message, Digital Input, Channel Input, Device Restarts.
Triggers commands based on specific times of day or selected days of the week.
Allows triggering commands based on receiving a specific message content.
Triggers commands when the digital input state changes, with options for edge-triggering or level-triggering.
Triggers commands based on channel input values meeting specified thresholds (above, below, within).
Triggers commands when the UC1152 device has finished restarting.
Details supported THEN actions: Change Output, Send Custom Message, Restart Device.
Defines actions to change the state of an output (activate, deactivate, change state) based on conditions.
Sends a custom text message via LoRaWAN when a condition is met.
Restarts the Ursalink UC1152 device when a specific condition is met.
Process for upgrading device firmware using the Ursalink ToolBox.
Example configuration for setting up a periodic status report using behavior statements.
Examples for controlling appliances, including sending alerts on threshold breaches.
Configure an alert for when a channel value exceeds a specified threshold.
General| Inputs | 4 |
|---|---|
| Outputs | 4 |
| Ingress Protection | IP30 |
| Input Type | Dry Contact |
| Output Type | Digital |
| Communication Interface | RS232, RS485 |
| Protocol | Modbus RTU |
| Operating Temperature | -40°C to 70°C |
| Humidity | 0% to 95% (non-condensing) |
To Next Page
