USB 7137 - 7138
Professional Power amplifier
SPECIFICATIONS
Power specifications USB 7137 USB 7138
Stereo into (4Ω) 2 x 130 Watt 2 x 200 Watt
Stereo into (8Ω) 2 x 100 Watt 2 x 150 Watt
Input sensitivity 0.77V
Input impedance 10K Ω Unbalanced
Frequency response
25 HZ~25KHz +0/-1dB -3dB points: 5 Hz~50KHz
(at 10 dB below rated output power)
Distortion (SMPTE-1M) <0.03%
S/N Ratio 100 dB
General specifications USB 7137 USB 7138
Full short circuit, open circuit, thermal, Ultrasonic and RF
Protections protection; stable into reactive or mismatched loads;
ON/OFF muting; current limiter
Controls Front: Power switch, 41 detent level control for each channel
Indicators
Signal: 2xGreen LED/Limit: 2xRed LED
Power: 1xBlue LED/Protect: 1xRed LED
Power: IEC Power cord
Connectors Input: 6.3 mm TRS
Output: Speakon
Power supply Voltage selectable: 115V AC 60Hz / 230V AC 50Hz
Fuses (250V)
AC115V:T4A/250V - AC230V:T2A/250V I
AC115V:T10A/250V - AC230V:T5A/250V
Dimensions 482 x 320 x 45mm
Weight 8 Kg 8.3 Kg
© US Blaster Europe BV
To Next Page
Loading...
