Need help?Do you have a question about the USA Measurements US-6011 Series and is the answer not in the manual?
General| Brand | USA Measurements |
|---|---|
| Model | US-6011 Series |
| Category | Measuring Instruments |
| Language | English |
Describes the different models of the US-6011 indicator, including their display types.
Details technical specifications like accuracy, resolution, input voltage, and operating environment.
Explains how to add multiple weights to get a total weight using the accumulation function.
Describes four different hold functions: Peak, Manual, Auto, and Average Hold.
Explains how to print current weight or accumulated total, and notes on tare mode printing.
Details the steps for calibrating the scale using a single calibration weight.
Explains the procedure for linear calibration using multiple weights for greater accuracy.
Details the pin assignment and output formats for the DB9 serial connector.
Explains ticket printout formats for non-adhesive printers using parameter C18=2.
Details ASCII commands the indicator can receive for operations like tare, zero, and weight reading.
Describes the data format for computer continuous sending mode (C18=4).
Explains the data format for PC or remote display continuous sending mode (C18=5).
Shows printing formats for Prime and Zebra label printers using C18=5 and C18=6.
Details the steps to calibrate the analog output, adjusting it to 4mA.
To Next Page
