声明：本说明书著作权归青岛欣易云联电子科技有限公司所有，未经允许任何单位或个人不得用于商业用途。
Capacity recording interface:
Press the "set" key briefly, and select "capacity / energy / time" for all. After selecting all,
the corresponding parameters will be displayed in reverse blue. Press the "up / down" key
to switch the parameters to be cleared. After selecting, press the "set" key briefly to clear
the corresponding parameters. After selecting, press the "set" key for 2 seconds or more or
no key operation for more than 6 seconds will exit automatically.
Voltage current curve interface:
"SET" button has no function
To Next Page
Loading...