usha Fashion Stitch User Manual (English)

Questions and Answers:

M
Margaret BrownAug 15, 2025
Why does the bobbin thread or needle break on my usha Fashion Stitch Sewing Machine?
- S
  Sarah BrownAug 15, 2025
  The bobbin thread may not be threaded properly in the bobbin case, lint might have collected in the bobbin case (clean it), or the bobbin could be damaged and not turning smoothly (exchange the bobbin). The needle might be incorrectly inserted, bent, or blunt. The needle clamp screw could be loose. The tension of the needle thread might be too tight. The fabric might not be drawn to the back when sewing is finished. The needle might be too fine for the fabric being sewn, or the pattern selector dial might have been turned while the needle was in the material.
N
nwrightAug 18, 2025
How to fix skipped stitches on my Usha Sewing Machine?
- M
  Melissa GriffithAug 18, 2025
  Skipped stitches can occur if the needle is incorrectly inserted, bent, or blunt. It may also happen if the needle and/or threads are not suitable for the material, or if a BLUE TIPPED needle is not being used for sewing stretch, very fine fabrics, and synthetics. Ensure the needle thread is properly threaded and the presser foot pressure is adequate.
S
Sharon HillAug 21, 2025
How to troubleshoot a noisy usha Fashion Stitch Sewing Machine that doesn't run smoothly?
- J
  Janet AllenAug 21, 2025
  If the machine doesn't run smoothly and is noisy, it could be due to threads caught in the hook mechanism or the feed dog being packed with lint.
M
Mrs. Erin GuerreroAug 25, 2025
What to do if the needle thread keeps breaking on my Usha Sewing Machine?
- K
  Kathryn BushAug 26, 2025
  The needle thread might not be threaded properly, the needle thread tension could be too tight, or the needle might be bent or blunt. The needle could also be incorrectly inserted. Ensure the fabric is being drawn to the back when sewing is finished. The thread might also be either too heavy or too fine for the needle.
S
Scott GrahamAug 28, 2025
Why is the cloth not feeding smoothly through my Usha Sewing Machine?
- A
  Aaron MartinAug 28, 2025
  The cloth may not feed smoothly because the feed dog is packed with lint, the presser foot pressure is too weak, or the stitches are too fine (make the stitches coarser). Also, ensure the feed dog is raised after 'Drop feed' has been used.
M
Mary BenderAug 31, 2025
What to check if my Usha Sewing Machine does not work?
- V
  Veronica RodriguezAug 31, 2025
  The machine may not work if it is not plugged in, a thread is caught in the hook race, or the stop motion knob is disengaged for bobbin winding.
P
pwilliamsSep 3, 2025
Why is my Usha Sewing Machine causing seam puckering?
- R
  Ryan AndersonSep 4, 2025
  Seam puckering can happen if the needle thread tension is too tight, the machine isn't threaded correctly, or the needle is too heavy for the cloth. Also, the stitches might be too coarse for the fabric; try making them denser. Check if the presser foot pressure is correctly adjusted. When sewing extremely lightweight materials, placing a sheet of paper underneath the fabric may help.
S
Stephanie SmithSep 7, 2025
Why are the buttonhole stitches on my usha Fashion Stitch Sewing Machine not balanced?
- V
  Veronica DavisSep 7, 2025
  If the buttonhole stitches are not balanced, it may be because the stitch length is not suitable for the fabric, or the work is being pulled or held back (do not force the fabric when guiding).
D
Dr. Elizabeth RiveraSep 12, 2025
Why are there stitches forming loops below the work with my Usha Sewing Machine?
- A
  Austin WilliamsSep 12, 2025
  If you're seeing stitches forming loops below the work, the needle thread tension may be too loose, or the needle is either too heavy or too fine for the thread.