Make sure the occupied sensor is not activated.
(Do not sit on the seat or place hands on the seat sensor)
Press Front( ) button for 2 seconds to extract the nozzle.
Use a tooth brush or soft cloth to clean the nozzle.
Press Stop button to retract the nozzle.
Do not forcefully push or pull the nozzles, or bend them. It may result in failure.
Make sure to use“Stop”button on the remote control.
Press Rear( ) button for 2 seconds to start auto cleaning.
The nozzle will be cleaned for 30 seconds and returned automatically.
Press Stop button while cleaning will retract the nozzle.
※ Do not use force to push or pull the nozzles while cleaning.
12
To Next Page
Loading...
