To Next PageTo Next Page
Need help?Do you have a question about the USSC Hotblast 1357M and is the answer not in the manual?
Introduction to the HOTBLAST Solid Fuel Warm Air Furnace, models 1357M & 1557M.
Highlights crucial warnings before installation or operation, including warranty voiding.
Summarizes crucial DANGER, WARNING, and CAUTION messages regarding fire, hot surfaces, and installation.
Covers local codes, mobile homes, and general safety guidelines for furnace installation.
Details safe chimney construction, inspection, and room air requirements for operation.
Lists essential do-nots for fuel, operation, and storage of flammable liquids.
Details required safe distances from the furnace and connector pipe to combustible surfaces.
Rules for pipe orientation, slope, sealing, support, and draft regulator placement.
Steps for setting the draft regulator to achieve optimal draft conditions.
Explains the color coding for electrical connections to the furnace components.
Mandates qualified installers and adherence to national and local standards.
Step-by-step guide for starting the furnace fire.
Procedures for adding wood and coal for optimal combustion.
Addresses common problems like poor draft, smoke spillage, and incorrect operation.
Guidance on preventing creosote buildup and handling potential chimney fires.
Solutions for smoke puffs from the furnace and problems with chimney draft.
Addresses inadequate heat delivery, blower issues, and fire management.
Tips for fire control, odor issues, and excessive creosote buildup.
General| Heating Capacity | Up to 2, 000 sq. ft. |
|---|---|
| Fuel Type | Wood |
| Efficiency | EPA Certified 78% |
| Weight | 250 lbs |
| Dimensions | 29.5" H x 26" W x 26" D |
| Heating Area | 1, 500 - 2, 000 sq. ft. |
| Log Size | Up to 18" |
| Type | Wood burning furnace |
