2. Start/pause
After plugging in, press menu button to choose function, and then press
continue 3 seconds. The selected function picture is flicker. It means this function
has started working.
Press , there is Beeps sounds and all the functions are light of
except . It means the product in standby status. During working, pull out
the drawer (the frying tray and basket), the function is pause. Push the drawer
back, then it will start to work again.
3.Menu selection：
Plug in, it is in the standby status. Press to light up. Slightly touch ,
then first default function light up. Press M to choose function. Press it one
time the menu will change one to another. And the related picture will light up. The
menu is circulation. Every function have its own default time and temperature.
But customer can adjust the time and temperature freely by using Time plus/minus
and Temperature plus/minus button.
To Next Page
Loading...