Why Uten KDF-558D Fryer does not work?
If your Uten Fryer isn't working, first ensure it's properly plugged into a grounded wall socket. If it is, check the timer. You need to turn the timer knob to the required preparation time to switch on the appliance.
Why fried snacks are not crispy when they come out of Uten KDF-558D Fryer?
If your fried snacks aren't crispy when they come out of the Uten Fryer, it might be because you're using snacks meant for a traditional deep fryer. Try using oven snacks instead, or lightly brush some oil onto the snacks before frying for a crispier result.
Why fresh potato fries are not crispy when they come out of Uten KDF-558D Fryer?
If fresh potato fries are not crispy when they come out of your Uten Fryer, it's likely due to the amount of oil and water in the fries. Make sure to dry the potato sticks thoroughly before coating them with oil. You can also cut the potatoes into thinner sticks or add slightly more oil for a crispier result.
Why fresh potato fries are fried unevenly in Uten Fryer?
If fresh potato fries are fried unevenly in your Uten Fryer, it might be because you didn't soak the potato sticks properly before frying. Soak them in a bowl of water for at least 30 minutes, then take them out and dry them with kitchen paper. Also, ensure you're using the right type of potato, one that stays firm during frying.
What to do if white smoke comes out of Uten KDF-558D Fryer?
If white smoke comes out of your Uten Fryer, it could be due to preparing greasy ingredients. Ensure the temperature is well-controlled and under 180? when frying these types of foods. Alternatively, the pan may contain greasy residues from previous use, so make sure to clean it properly after each use.
General| Type | Deep Fryer |
|---|---|
| Power | 1800 W |
| Temperature Control | Yes |
| Adjustable Thermostat | Yes |
| Material | Stainless Steel |
| Timer | Yes |
| Voltage | 220-240 V |
Critical warnings regarding electrical shock and appliance misuse.
Guidelines for safe operation, placement, and handling.
How to start, pause, and resume appliance operation.
Selecting functions, default settings, and manual time/temperature adjustments.
To Next Page