139139
17. Use Installation and Sa17. Use Installation and Safety Rules of Attachmentfety Rules of Attachment
The attachment is in accordance to International standard ISO2328The attachment is in accordance to International standard ISO2328
《《
HookHook--on type fork arms and carriageson type fork arms and carriages --
mounting dimensionsmounting dimensions
》》
, such as clamp, rotator, paper roll clamp, carrying ram, side, such as clamp, rotator, paper roll clamp, carrying ram, side --shifter etc.shifter etc.
Attachment UseAttachment Use
（（
11
））
Understand Understand the conthe contents ltents listed isted on on the the nameplate of nameplate of the the attachment, read attachment, read the ithe instruction nstruction manual beforemanual before
operating attachment.operating attachment.
(Especially the manual from attachment company) Before operating the attachment, personnel should be(Especially the manual from attachment company) Before operating the attachment, personnel should be
properly trained and qualified.properly trained and qualified.
（（
22
））
The Basic capability and operating methods of attachment should be understood, especially the admit load, liftThe Basic capability and operating methods of attachment should be understood, especially the admit load, lift
height, size of cargo and adapt range of attachment.height, size of cargo and adapt range of attachment.
（（
33
））
When operating the multiWhen operating the multi--functional attachment, such as with sidefunctional attachment, such as with side--shifter, clamp or rotator, only operate oneshifter, clamp or rotator, only operate one
function at a time.function at a time.
（（
44
））
DO NOT move a truck with attachment when load is in a high position. If the size of cargo is too large, DO NOTDO NOT move a truck with attachment when load is in a high position. If the size of cargo is too large, DO NOT
move the truck. When transporting cargo, ensure ground clearance between the bottom of cargo and ground ismove the truck. When transporting cargo, ensure ground clearance between the bottom of cargo and ground is
less than 300mm and the mast is inclined back.less than 300mm and the mast is inclined back.
（（
55
））
The weight of cargo The weight of cargo shouldn‘t exceed the combined limit of the shouldn‘t exceed the combined limit of the carrying capacity of forklift and carrying capacity of forklift and attachment. It isattachment. It is
not allowed to have a partial load at high position. It is a short time work for attachment with sidenot allowed to have a partial load at high position. It is a short time work for attachment with side --shifter. Partialshifter. Partial
load is around 100mm (Above 5 ton (including 5 ton), the sideload is around 100mm (Above 5 ton (including 5 ton), the side--shifter is movable within 300mm.shifter is movable within 300mm.
（（
66
））
In the range of the projection forth 2m of the lower of attachment and cargo, prohibit stand to avoid theIn the range of the projection forth 2m of the lower of attachment and cargo, prohibit stand to avoid the
suddenness except the driver position under overhead.suddenness except the driver position under overhead.
（（
77
））
DO NOT apply emergency brake while moving. Travel slowly with load.DO NOT apply emergency brake while moving. Travel slowly with load.
（（
88
））
Prohibit outside force when attachment working.Prohibit outside force when attachment working.
（（
99
））
DO NOT operate attachment beyond normal parameters.DO NOT operate attachment beyond normal parameters.
（（
1010
））
When the attachment malfunctions, prohibit use without check.When the attachment malfunctions, prohibit use without check.
To Next Page
Loading...
