3838
8. Head Lamp Check8. Head Lamp Check
Make sure that the head lamp is lighting when theMake sure that the head lamp is lighting when the
key is at ―ON‖ position.key is at ―ON‖ position.
9. Turn Signal Check9. Turn Signal Check
Make sure that the turn signal operates properlyMake sure that the turn signal operates properly
by moving the turn signal lever.by moving the turn signal lever.
10. Hand Brake Check10. Hand Brake Check
（（
11
））
drive truck drive truck slowlyslowly..
（（
22
））
loosen hand brake lever, stop the truck, andloosen hand brake lever, stop the truck, and
truck has no deviation.truck has no deviation.
11. Back11. Back--Up Lamp and Buzzer CheckUp Lamp and Buzzer Check
The backThe back--up lamp comes on and buzzer soundsup lamp comes on and buzzer sounds
when the shift lever or directional control lever iswhen the shift lever or directional control lever is
placed in reverse position.placed in reverse position.
12. Turning12. Turning
Operate the truck Operate the truck slowlyslowly..
Turn the steering wheel to the left and then right 3Turn the steering wheel to the left and then right 3
times times respectivelyrespectively..
Check that the steering forces are equal to theCheck that the steering forces are equal to the
right and left.right and left.
13. Horn13. Horn
Press the horn button to make certain the hornPress the horn button to make certain the horn
sound is normal.sound is normal.
14. Driver’s 14. Driver’s Seat AdjustmentSeat Adjustment
Make sure the driver‘s seat is properly positioned.Make sure the driver‘s seat is properly positioned.
If not properly, shift the adjusting lever and move theIf not properly, shift the adjusting lever and move the
driver‘s seat to a position which provides easy accessdriver‘s seat to a position which provides easy access
to all foot and hand controls.to all foot and hand controls.
15. Lifting Lever, Tilting Lever and Attachment15. Lifting Lever, Tilting Lever and Attachment
Lever CheckLever Check
Check the loading levers (for lift, tilt and optionalCheck the loading levers (for lift, tilt and optional
attachment) for looseness and smooth operation.attachment) for looseness and smooth operation.
Increase the rotate speed of engine, make certainIncrease the rotate speed of engine, make certain
that the lifting lever, tilting lever and attachment lever isthat the lifting lever, tilting lever and attachment lever is
in good work condition.in good work condition.
16. Instruments and Sensors16. Instruments and Sensors
Make sure that hour meter, water temperatureMake sure that hour meter, water temperature
indicator, oil temperature indicator, transmission fluidindicator, oil temperature indicator, transmission fluid
sensor and fuel sensor etc., sensor and fuel sensor etc., function properly.function properly.
17. Brake Pedal and Inching Pedal Check17. Brake Pedal and Inching Pedal Check
Drive truck slowly, press down brake pedal, andDrive truck slowly, press down brake pedal, and
brake lamp lights.brake lamp lights.
Drive truck slDrive truck slowlyowly, press down , press down inching inching pedal, thepedal, the
speed of truck decreases, press downward more, truckspeed of truck decreases, press downward more, truck
should stop.should stop.
18. Tire Inspection18. Tire Inspection
Check the tires for damage, and the rims for damage.Check the tires for damage, and the rims for damage.
19. Tire Pressure (Pneumatic Only)19. Tire Pressure (Pneumatic Only)
Turn tire valve cap counter clockTurn tire valve cap counter clock--wise and remove it.wise and remove it.
Using a tire pressure gauge, measure the inflationUsing a tire pressure gauge, measure the inflation
pressure, and adjust it to the specified pressure, ifpressure, and adjust it to the specified pressure, if
needed. After making sure there is no air leakage fromneeded. After making sure there is no air leakage from
the tire valve, reinstall the cap.the tire valve, reinstall the cap.
To Next Page
Loading...
