To Next PageTo Next PageWhat to do if my Utilitech D-7-H does not turn on?
If your Utilitech Electric Heater isn't turning on, first ensure the power cord is properly plugged into an electrical outlet. Then, verify that the main fuse box is providing electricity. Lastly, check if the thermostat is set higher than the current room temperature; if it's too low, increase the thermostat setting.
General| Brand | Utilitech |
|---|---|
| Model | D-7-H |
| Category | Electric Heater |
| Language | English |
Follow basic safety precautions to reduce risks of fire, shock, injury, and property damage.
Use heater indoors only, disconnect power when not in use, ensure clearance, avoid liquids and flames.
Heater automatically shuts off if tipped over. Resets when upright.
Heater automatically shuts off if internal components reach critical temperature.
Ensure all parts are present and undamaged before starting assembly.
Turn power to 'OFF' and disconnect the power cord from the electrical socket.
Use a vacuum for dust and a damp cloth for surfaces. Avoid chemicals.
Store the heater in its original or similar container in a cool, dry location.
Manufacturer warrants against defects in materials and workmanship for 1 year from purchase.
